Category: Roofing

Roofing

Roofing Tips – How to Protect Your Home From Roof Leaks

Oskar Hooper

The roof is the top part of a building that protects people and things inside from rain, wind and sun. Roofs can be made of wood, metal, clay or asphalt shingles.

Roofing

Most roofers work on residential homes. They may install new roofing or repair existing roofs. They use ladders and scaffolding to access the roof. Contact Red Stick Roofing Of Louisiana for professional help.

A dripping faucet is more than just a nuisance. It can waste water and lead to more expensive repairs in the future. Fortunately, most faucet leaks are caused by small components that can be replaced easily at home. Most of these parts are standard and found at your local hardware store. If you’re not sure which part is causing the problem, take the old one with you to ensure you buy the correct replacement. It’s also a good idea to have a nontoxic plumber’s grease on hand. This will help you tighten any loose screws or nuts without damaging the threads.

Shut off the water supply before starting any repair work. Then remove the handle, using a screwdriver and Allen wrench. The decorative cap at the top of the handle may be difficult to remove, so you can slip a flathead screwdriver under it and pry it off. It’s important not to bang the handle; you could damage the inner workings and cause a bigger leak.

The main body of the faucet is held in place by a screw on top and a set screw at the back of the handle. You may need a pair of large, slip-joint pliers or an adjustable wrench to remove these. If necessary, use penetrating oil such as WD-40 to help loosen the screw. Once the handle is removed, you’ll be able to see the faucet assembly and unscrew the packing nut to reveal the stem. You’ll likely need to replace the O-ring that holds the stem in place. It can range in size from 3/8 to 5/8 of an inch, so make sure you get the right one and coat it with plumber’s grease before replacing it.

Once you’ve unscrewed the stem, you can remove the disc cartridge and replace it if necessary. If the cartridge is fine, the leak may be coming from a round, recessed disk called the retainer. If it’s pitted, you can grind it flush and add a new retainer ring to solve the problem.

Lastly, you’ll need to remove the adjusting ring (if applicable) by turning it counterclockwise with a spanner tool included in your repair kit. Then you can remove the plastic cam and packer. You can then replace the two rubber seats and springs, being careful to align them correctly.

Leaking Faucets

A dripping faucet might seem like an annoying little nuisance at first, but over time it can lead to expensive water damage and a financial sinkhole for your household budget. On average, leaky faucets waste one trillion gallons of water per year across the country. Even a small drip can cause the water meter to continue running, leading to an increase in your monthly water bills.

Most leaking faucets are caused by worn-out parts, and the parts that need replacing vary depending on the type of faucet. Older faucets may use ball valves, compression cartridges, or washerless cartridges with seats and springs; newer faucets often feature ceramic disc cartridges that don’t require any seat or spring. Before making a repair, it’s important to understand the different types of faucets and their parts so you can identify which part is causing the problem.

Corrosion and general wear-and-tear can cause the rubber seals that keep your faucet in place to deteriorate, creating tiny crevices where water seeps through. If left untreated, this can lead to corroded pipes and eventually, water leaks. Performing regular maintenance on your faucet can help prevent this from happening. You should regularly check the tightness of all the nuts and bolts on your faucet, especially the ones that connect to your shut-off valves and flexible supply tubes. Also, be sure to drain and wrap any exposed pipe in unheated areas to prevent freezing.

The rubber washer that creates a watertight seal between the valve seat and the spout can wear out from constant friction, resulting in dripping around the spout area. This can be fixed by replacing the worn-out washer. A new washer should be wiped clean before inserting it, and it’s a good idea to coat it with nontoxic plumber’s grease to ensure a strong, waterproof seal.

Leaks can also occur at the base of your faucet where the stem and handle are set into the counter. This can be due to a number of issues, including corrosion within your pipes, faulty valves, or high water pressure. These problems can be hard to detect because they’re often invisible, but a plumbing professional can use a special camera to check the interior of your pipes.

Leaking Pipes

Leaking pipes are more than just an annoyance; they can cause serious water damage to your home and contribute to the growth of mold, which is not only unsightly but also a health hazard. Fortunately, while pipe leaks often require the attention of a professional plumber, they can usually be fixed by homeowners willing to investigate and take immediate action. Before attempting to repair any leaky pipes, you must make sure that the power and/or water supply is turned off to the affected area of the house. It’s also a good idea to dry the area around the leak and to wear rubber or nitrile gloves when working on plumbing repairs.

Roofing

Costs of Roof Replacement

Sapphire Casey

Many factors influence the cost of a roof replacement. Some are outside the homeowner’s control, such as geographical location and weather patterns. Others, like the choice of materials, are within their control.

Roof Replacement

A leaky or sagging roof means it’s time for a replacement. A deteriorating roof can cause rot, mold and other damage to the home’s structure. Visit Website to learn more.

Homeowners who are considering roof replacement must evaluate various factors to determine the best course of action. This includes the scope of damage, cost and whether or not repairs would be cost-effective. It’s also important to consider if the homeowner’s insurance policy covers the project.

Repairing or replacing a roof is a costly endeavor, but it is an investment that can greatly improve your home’s overall value. It’s also important to note that a new roof is more energy efficient than the current one, which can save you money on your utility bills.

The cost of a roof replacement depends on several factors, including the roofing material and the size and complexity of the structure. The roofing material’s price can vary from basic three-tab shingles to high-end slate or metal shingles. The roofing contractor’s fee is another major factor in the total roof replacement cost. A contractor’s experience, knowledge and skills will impact their fee.

Other costs to keep in mind include permits and inspections. These can cost $150 to $500 and are typically required for a roof replacement. You will also need to make sure that the contractor has the proper licensing and insurance coverage for the job.

If you are unsure of what type of roofing to choose, the experts at your local roofing company can help you decide. They can explain the pros and cons of different roofing materials, including the cost, durability, longevity and aesthetics. They can also recommend the best options based on your budget and lifestyle requirements.

Roof replacement costs can be influenced by the roofing materials used, the size and shape of the roof, and any exterior add-ons. For example, a chimney requires special flashing and a more detailed underlayment system, which can increase the cost of the project. A skylight also increases the cost because it may require special flashing and a differently-sized roofing material.

Depending on the extent of the damage, it may be more practical to opt for a repair rather than a full replacement. However, if the repairs are limited and the roof is approaching the end of its life, it might be more cost-effective to replace it altogether.

Materials

The materials used for your roof will impact its longevity, durability and appearance. Each material has its own pros and cons, and some are better suited to specific climates than others. For instance, if you live in an area where it snows frequently, a metal roof may be more suited to your needs because it’s durable and resists ice and wind damage. Another roofing material option is a clay or concrete tile, which offers a classic aesthetic and can last for up to 50 years. These roofs are not as heavy as shingles, but they can be more expensive to install and require regular maintenance and repair for algae and insect damage.

When deciding on your new roof, consider its cost, lifespan and warranty options. You should also evaluate the roofing sheathing, which is a wood foundation layer that contractors use to attach shingles and other roof coverings. A quality sheathing will keep moisture from damaging your home’s frame and rafters, and it should also be resistant to mold and fungus growth.

Asphalt shingles are a popular residential roofing choice, as they’re inexpensive and easy to maintain. However, they’re sensitive to extreme temperatures and can crack or expand over time. If your shingles start curling or losing granules, it’s time for a replacement.

Other residential roofing materials include clay, concrete and terra-cotta tiles. These are durable and offer an attractive aesthetic, but they can be more expensive than other roofing materials. They’re also prone to rot, mildew and insects.

For commercial facilities, EPDM membrane is a common flat-roofing solution. It comes in large sheets, which minimizes the need for seams. It’s also water-resistant and fire-resistant, and it lasts 10-15 years.

A good roof ventilation system is essential for keeping your home comfortable and reducing energy costs. Ventilation will reduce the buildup of heat and moisture, which can cause ice dams and other roof problems. To function properly, a roof ventilation system must be balanced with equal amounts of air coming in and going out.

A good roofing contractor will provide you with a detailed list of all the components that comprise your roof, including the underlayment, leak barriers, starter shingles, hip and ridge shingles, ventilation and fascia boards. It’s also important to get a copy of the manufacturer’s warranty, which will cover any defective products or workmanship. A comprehensive warranty is especially important if you plan to sell your home in the future.

Installation

A roof replacement is a big job and requires careful planning. It is often necessary to get a permit for the work, so homeowners should check with their local building department to determine what regulations apply. Depending on the location, some jurisdictions may require homeowners to submit a detailed description of the project, measurements of their roof and the type of materials they plan to use.

After the old roofing is removed, the contractor will inspect the underlying structure of your roof. If there are areas that need attention, such as rot or decay, they will repair them before installing the new roofing. This process is also the perfect time to replace any vent pipes, skylights or chimneys that were removed during the tear-off.

Next, the contractor will install a new layer of underlayment. This is an important step, especially in South Florida where moisture can be a serious problem. The underlayment is a water-resistant material that is installed over the entire roof deck. It is a critical component to prevent leaks and extend the lifespan of your new roof.

Once the underlayment is in place, the roofing crew will begin to install the shingles. They will start at the bottom of the roof and work their way to the peak. It is a good idea to install ridge vents during this process to promote air circulation in your attic space and prevent the formation of winter ice dams.

The shingle installation process is usually fairly quick, but it is not without its challenges. When laying a new roof, the contractors must be extremely careful not to puncture or damage the existing underlayment and flashing. In addition, it is important to remove all nails or pound them flat to avoid puncturing the new shingles with protruding nails.

It is best to keep pets indoors during a roof replacement, as the noise and disturbance can be stressful for them. However, if that is not possible, they should be kept in a safe, quiet area away from the construction site. Also, if you have any plants or garden furniture in close proximity to the house, it is a good idea to cover them with tarps.

Warranty

The warranty offered by the manufacturer is another factor to consider when choosing a roofing contractor. Generally, roof warranties fall into three categories: materials only, material and labor on a pro-rated basis, or No Dollar Limit (NDL). The best option is a warranty that covers both materials and labor for the entire term of the warranty. These are the most comprehensive and cost-effective. Unfortunately, these warranties can often be voided if the homeowner fails to comply with certain terms and conditions. Some of the most common reasons include bringing in a different contractor, failing to set regular inspections, or ignoring maintenance requests.

One way to decrease the likelihood that a warranty will be voided is to get the manufacturer involved in the project from the onset. This will allow the manufacturer to review design details and spot any problems that might impact the warranty. Necessary modifications can then be made to the design and the project can move forward without risking the warranty.

Manufacturers typically offer warranties on their roofing materials and roof installations, with some offering a ‘lifetime’ guarantee for the lifetime of the home. These are very comprehensive and can cover everything from shingles to installation mistakes. In order to qualify for these warranties, homeowners must purchase a complete roofing system from the manufacturer and have it installed by a certified contractor adhering to their strict standards.

Other warranties are ‘pro-rated’, meaning that they only cover labor and a portion of the replacement costs for the first few years. This can be a more cost-effective choice, but it still provides limited coverage and does not provide full protection for the life of the roof. For a more thorough coverage, homeowners should look for an NDL warranty that will replace the entire roof if it is defective.

The most comprehensive warranties are often offered by leading manufacturers on their entire roofing systems and require installation by contractors who meet their strict requirements. These types of warranties are highly sought by homeowners seeking robust protection for their new roofing investment. However, it is important for homeowners to understand the nuances of the various warranties available so that they can make an informed decision on which will best suit their specific needs and budgets.

Roofing

Clay roof tiles

Sapphire Casey

A roof is a weather-proof covering that shields the interior of a building from precipitation. There are many different types of roofing, ranging from shingle to metal. For more information, click the link https://www.myprestigeexteriors.com/ to proceed.

A shingle roof is typically made from a paper-like material that’s placed over plywood sheathing to protect the home from water damage. The shingles are then nailed to the rafters or pre-fabricated trusses.

Shingles, whether made from wood, clay, slate or metal, are a key element of roofing. Through a specific layering pattern, they protect your home from the elements while adding beauty and boosting curb appeal.

Asphalt shingles are the most popular roofing material in the country, and there are many types of them to choose from. Some offer better energy efficiency than others, while some have higher impact or wind resistance ratings. Choosing the right shingle type depends on your budget and aesthetic preferences.

The backbone of a shingle is its fiberglass mat, which offers the ideal qualities for handling and durability. It’s topped with a layer of asphalt, which serves as both a water-shedding agent and an adhesive. A small amount of granules, usually made of colored glass or a mineral material, adds color and texture to the shingle surface.

Other important considerations when selecting a shingle are its energy efficiency, maintenance requirements and cost. Energy-efficient shingles use reflective coatings to reflect sunlight and help reduce heat transfer into living areas of the house. They’re typically more expensive than standard shingles, but over the long run they can save homeowners money on energy costs.

A shingle’s longevity also depends on its ability to resist the elements. In areas that experience frequent strong winds, heavy rains and snow, or wildfires, opt for a roof with high impact or fire resistance ratings. Other factors that affect a shingle’s lifespan include its location, its age and the amount of sun exposure it receives.

Leaks occur where the shingle layers are penetrated or interrupted, and around chimneys and skylights. These special areas require flashing, which is a sheet of weather-resistant material that’s placed under the shingle and covers seams and valleys in the roof. IKO recommends open metal valleys, while some companies offer a pre-formed width of corrosion-resistant metal for closed valleys.

The most common leak sources include improper installation and inadequate attic ventilation. Other problems that can void your shingle warranty include algae streaking, damage caused by installing equipment like satellite dishes or associated with making additions or alterations to the home, and discoloration from mold, mildew or fungus (unless covered under the warranty). Regularly cleaning gutters is another way to extend a shingle’s life.

Asphalt

Asphalt is the most popular roofing material in America. It is available in a variety of styles and colors, so you can find the perfect fit for your home. It also provides good insulation, which helps to reduce your energy costs. Plus, it’s fire-safe and aesthetically pleasing.

The main ingredient in asphalt is a dark, sticky liquid called bitumen. This is a byproduct of petroleum and is used to bind aggregates together. The aggregates are typically a mixture of crushed stone, gravel or sand. The asphalt is mixed with the aggregates at special processing plants. The plant operators create different asphalt mixtures based on the climate where the project is being constructed.

These specialized asphalt mixtures are called hot mix, warm mix and cold mix asphalt. Each type has a specific purpose and is better suited for certain construction projects. For example, a highway or road construction project would require a high-quality asphalt mixture that is heated and then spread and rolled. A warmer mixture would be easier to work with, saving on energy expenses.

Hot mix asphalt is the most common, but there are many other types of asphalt used for various purposes. Mastic asphalt is a thicker formula that is used to waterproof walls and surfaces. It is used for repairing cracks and holes in driveways and parking lots, for example.

Asphalt can also be found in sports arenas and playgrounds as a surfacing material for tennis and basketball courts. The smooth surface helps to cushion the impact of player movements and provides good ball bounce. Plus, it’s easy to maintain and repair, which extends the lifespan of the pavement.

Fiberglass

Whether you’re looking for clear roofing sheets, fiberglass tanks or boats, Perfect-Tech Fiberglass Nig Ltd can help. Their team specializes in the production of fiberglass products and has many years of experience creating aesthetically-pleasing GRP, FRP, and Fiberglass constructions. They create specialized fiberglass materials that are aesthetically-pleasing and durable.

A popular option for flat roofs, fiberglass is a lightweight, strong and durable material that’s easy to install. It’s also water-resistant, fire-resistant and won’t warp or crack over time. This makes it an ideal choice for homes and businesses that are renovating their existing structures.

The main raw material for fiberglass is glass, but the specific composition of that glass can vary depending on the intended application. It can be made from silica sand or soda ash, for instance. In general, the molten glass is then directed into one of several forming processes. In some cases, the resulting fibers are woven together to form a mat.

Other times, the resulting mat is molded to create certain shapes. The mat is then coated with a layer of polyester resin, which makes it durable and resistant to corrosion and damage. This makes fiberglass ideal for commercial and residential buildings, aircraft, and other products that require a high level of strength and durability.

Some people may not realize the importance of fiberglass, because it’s a product that’s usually hidden from view, tucked away in an attic or encapsulated inside drywall. It’s an insulator, slowing the flow of heat, cold, and sound in structures and cars, while trapping pockets of air to save energy and money.

It’s also a versatile material for a wide variety of projects, from building and manufacturing to swimming pools, sporting equipment, and even electromagnetic windows. Fiberglass can be molded to take the shape of almost any project and is also highly durable, resisting corrosion and other damage. It’s a good choice for areas that are often exposed to harsh conditions, such as industrial environments. It’s also less prone to changes in temperature, so it’s suitable for use on outdoor applications. It’s also easy to handle, transport and install.

Granules

Granulation is a mechanical process that changes the physical properties of a powder or powder blend. It improves flow characteristics, increases density and reduces component segregation and particle size distribution. It is used when the raw material exhibits behavior properties that hinder other production processes, such as caking and clumping. It also allows the product to be more easily compressed into tablet form during manufacturing.

It can be done in two ways: dry granulation or wet granulation. In dry granulation, the powder is fed into a roller compactor that compresses it to create granules. This is commonly used in the production of directly compressible excipients and drugs. It is also useful for drying herbal materials and immediate/sustained-release formulations.

Wet granulation uses liquid binder to link individual particles together, forming a granular mass that can be further processed into tablets. This method is often preferred for complex formulations, as it produces granules with superior flowability and dissolution characteristics. However, it can be time-consuming and requires a downstream drying process.

Pneumatic dry granulation (PDG) is an innovative alternative to traditional methods. It utilizes roller compaction and a proprietary air classification method to produce granules with outstanding flowability, density and particle size distribution. This new granulation technique can also reduce energy costs, and it is suitable for a variety of powders.

In addition to improving the performance of fertilizers, granulation also helps to reduce waste management costs and prevent run-off into water bodies. It turns organic waste into a more readily marketable and easier-to-handle product, which can help reduce the need for landfills. It can also be beneficial to soil health, as granules improve water infiltration and promote a healthier microenvironment for plants. Additionally, it reduces the odor associated with raw manure and makes the product safer to handle. For these reasons, it is an ideal solution for a wide range of applications.

Roofing

Types of Commercial Roofing

Robbie Russo

Commercial Roofing Downingtown PA plays a vital role in protecting businesses, investments, and people from the elements. The roofs of commercial buildings are a complex mix of materials and installation methods.

There are many types of commercial roofs, but shingles, TPO and PVC membranes, and seamless elastomeric coatings are among the most popular choices.

Single-ply membranes

roofing

Single-ply membranes are a durable and cost-effective solution for commercial roofing. They are lightweight, long-lasting, and can resist harsh challenges such as intense UV rays, high winds, chemical residue, and thermal shocks. With proper installation and maintenance, they can last for decades.

These systems are available in a variety of styles, materials, and technologies depending on your needs. The most common types are polyvinyl chloride (PVC), thermoplastic polyolefin (TPO), and ethylene propylene diene monomer rubber (EPDM). PVC is a popular choice because it has reflective properties that can help reduce air conditioning costs, as well as resistance to chemicals, flames, and water. TPO and EPDM are also durable roof membranes with heat-weldable seams.

However, as with any roofing system, it’s important to read the manufacturer’s warranty carefully before committing to purchase and install one. There are usually two separate warranties: a manufacturer’s warranty on the roofing membrane, and a labor and installation warranty that covers any issues that arise during the project. The labor and installation warranty should be issued by the roofer who installed your roofing system and will typically include a detailed checklist of what is and isn’t covered.

While it’s true that some sharp objects can puncture single-ply membranes, regular inspections and maintenance should curb this problem. It is important to check the condition of the membrane, including the seams and attachment points. If you notice any signs of damage, like blisters or shrinkage, these should be addressed immediately.

In addition, many single-ply membranes are made to be resistant to certain chemicals, making them an excellent option for a commercial building with a chemical processing plant or similar facility. This durability means that you’ll save money on frequent repairs and replacements, and the roofing system will remain in good condition for longer than many other roofing options.

Although there are a number of benefits to using single-ply membranes, it’s crucial that you consult with a roofing professional before making a decision. They can guide you to a roof that will best suit your business’s unique requirements and climate conditions. They can also explain the differences between these different roofing systems, and which will offer the most value for your business.

Shingles

Shingles are commonly used in residential roofing, but are also a popular choice for commercial roofs. They are attractive and durable, and come in many different styles and colors to match any business. These roofs are usually less expensive than other roofing materials, making them an excellent choice for businesses looking to upgrade their appearance without spending a lot of money.

When selecting shingle roofing, it is important to consider the type of weather in your area. High winds, heavy rains, and frequent hail can shorten the lifespan of a shingle roof. Additionally, hot temperatures can cause the shingles to break down. If you are considering a shingle roof, be sure to invest in high-quality shingles, and have it properly installed by a professional.

Asphalt shingles are the most common shingle type used in commercial roofs. These are a good choice for most commercial buildings, as they are easy to install and maintain. The most common type is the three-tab shingle, which has an agreeable price point and requires minimal maintenance. Other options are architectural shingles, which have a more unique look and offer a longer lifespan.

These shingles are thicker and have more layers, making them more durable and wind-resistant than three-tab shingles. They can be more expensive, but they can also have lifetime warranties from the manufacturer. If you are planning to use a shingle roof in an area with high temperatures, heavy rainfalls, or frequent hail, it may be worth the investment.

It is also important to note that shingle roofs aren’t suitable for every commercial building. They can’t support the heavy equipment that is often used on commercial properties, and they aren’t designed for low-slope roofs.

If you are interested in using shingles on your commercial property, be sure to contact the experts at GSM Roofing. We can provide a free inspection and estimate, and make sure your shingle roof is up to par. We will pay attention to every detail, so you can be confident that your roof will protect your business for years to come. Call us today for more information.

Metal

Metal is a durable and affordable material that can be used in a variety of commercial roofing applications. It is available in many colors, styles, and materials, including copper, aluminum, steel, and galvanized tin. MBCI metal roofs and wall panels can be customized with exposed or hidden fasteners to suit different architectural styles. These options provide a visual aesthetic for the building while providing durability and low maintenance costs.

Stainless steel is another option for commercial roofing, especially in hotter climates. It can effectively reflect thermal temperatures away from a building, which reduces cooling costs and energy usage. Stainless steel is also durable and can last for 60+ years, making it an excellent choice for a commercial roof.

The upfront cost of a metal roof is higher than traditional roofing, but the service life of a metal roof far exceeds other types of commercial roofing materials. In addition, the longevity of a metal roof reduces overall building expenses by eliminating maintenance costs and repairs. Additionally, the material is fire resistant, and the insulation can improve energy efficiency in a building.

There are a variety of different types of metal roofing, including EPDM (Ethylene Propylene Diene Monomer) and TPO (Thermoplastic Olefin). These types of commercial roofs offer durability, versatility, and resistance to extreme weather conditions.

Other types of metal roofing include standing seam and corrugated metal. Standing seam metal is made from rolls of metal that are joined together, creating a seamless surface. This type of metal roofing is often installed with concealed clips, which eliminates the need for drilling holes into the surface of the building.

Corrugated metal is a popular choice for flat or low-sloped commercial roofs because it allows water to drain quickly. It is also highly durable and can withstand high winds and other extreme weather conditions. It is also lightweight, reducing the burden on the structural structure of the building. However, this type of roofing can be difficult to install correctly. It requires extensive expertise to ensure that the roof is protected from water and wind damage. In addition, it is important to choose the right thickness of the metal for your project.

Seamless elastomeric coatings

Elastomeric roof coatings are a combination of different products mixed into one compound to create an extremely strong and durable roofing material. They are typically used to cover existing roofing materials and protect against moisture, sunlight, fungus, wind, debris, and other environmental elements. They are also highly versatile and can be applied to flat or sloping surfaces. This makes them an excellent choice for a wide range of commercial roofs.

In order to work, these types of roof coatings must be applied to a clean and dry surface. This is why the experts at TRICO PAINTING recommend regular inspections of your home or managed HOA property to identify and repair cracks in the elastomeric coating. It is important to follow the manufacturer’s recommendations for preparation to ensure that the product will offer proper protection.

Once the elastomeric roof coating is fully dried and cured, it will be extremely durable. This type of roof coating is able to expand and contract with temperature changes, so it will not crack or break as easily as traditional roofing materials. This flexibility also helps prevent leaks and reduces the need for frequent repairs.

There are three main types of elastomeric roof coatings, and each has unique properties that make it a great option for different kinds of roofing structures. Acrylic elastomeric coatings are very popular due to their low cost and versatility. They are easy to clean and provide good insulating properties. They are also resistant to algae and fungus. However, they are not as water-resistant as other elastomeric roof coatings.

Silicone elastomeric coatings are more expensive than acrylics, but they offer greater impact resistance and can withstand ponding water. They are also more resistant to weathering, making them a great choice for steep-sloped roofs.

Urethane elastomeric coatings are the most durable of the three types, and they can resist even the most severe weathering conditions. They are not as flexible as silicones, but they are still much more durable than acrylics and silicones.

No matter which type of elastomeric roof coating you choose, it is crucial to have it properly installed by an experienced contractor. The right application method will ensure that the roof coating offers maximum durability and will last for many years.